联系我们
电话:0319-8197677 / 0319-8197688
手机:13833932888
传 真:0319-8197155
邮箱:wsn@hbtmhc.com
网址:www.hbtmhc.com
地址:河北省邢台市清河县清凉江工业园区
在线留言
Copyright © 2017 河北通明焊接材料有限公司 版权所有
产品中心
牌号Model |
国标GB |
美标AWS |
用途Purpose |
TMS-308L |
TS308L-FC11 |
E308LT1-1 |
用于焊接工作温度低于300℃的耐腐蚀的06Cr19Ni10,06Cr18Ni11Ti的不锈钢结构。用于301,302,304,304L,308,308L等不锈钢材料的焊接。Used for welding corrosion-resistant 06Cr19Ni10, 07Cr19Ni11Ti stainless steel structures and the working temperature should be below 300℃. It used for welding 301,302,304,301L, 308,308L and other stainless steel materials. |
TMS-309L |
TS 309L-FC11 |
E309LT1-1 |
用于合成纤维、石油化工等设备制造的相同类型的不锈钢结构及复合钢、异种钢等构件,也可用于核反应堆、压力容器内壁过渡层堆焊和塔内构件焊接,尤其适合于对焊缝外观要求较高场合使用。It is used for the same type of stainless steel structure and composite steel, dissimilar steel and other components manufactured by synthetic fiber, petrochemical and other equipment. It can also be used for nuclear reactor, pressure vessel inner wall transition layer surfacing and tower inner component welding. It is especially suitable for the use of high requirements on the appearance of weld. |
TMS-316L |
TS 316L-FC11 |
E316LT1-1 |
用于超低碳022Cr17Ni12Mo2不锈钢,也可用于焊后不能进行热处理的铬不锈钢及复合钢和异种钢的焊接. Used for ultra-low carbon 022Cr17Ni12Mo2 stainless steel, can also be used for welding of chromium stainless steel and composite steel and dissimilar steel without heat treatment after welding. |
TMS-317L |
TS 317L-FC11 |
E317LT1-1 |
适用于焊接低碳18%Cr-12%Ni-2%Mo-N不锈钢(SUS316LN等),低碳19%Cr-13%Ni-3%Mo不锈钢(SUS317L等)。 Suitable for welding low carbon 18%Cr-12%Ni-2%Mo-N stainless steel (SUS316LN, etc.), low carbon 19%Cr-13%Ni-3%Mo stainless steel (SUS317L, etc.). |
TMS-347L |
TS 347L-FC11 |
E347LT1-1 |
适用于焊接18%Cr-8%Ni-Nb不锈钢(SUS347等),低碳18%Cr-8%Ni-Ti不锈钢(SUS321等)。 Suitable for welding 18%Cr-8%Ni-Nb stainless steel (SUS347, etc.), low carbon 18%Cr-8%Ni-Ti stainless steel (SUS321, etc.). |
TMS-309LMo |
TS 309LMo-FC11 |
E309LMoT1-1 |
用于焊接耐硫酸介质(硫氨)腐蚀的同类型不锈钢容器,也可作不锈钢衬里、复合钢板、异种钢的焊接。Used for welding sulfuric acid resistant medium (thiamine) corrosion of the same type of stainless steel container, can also be used for stainless steel lining, composite steel plate, dissimilar steel welding. |
TMS-310 |
TS 310-FC11 |
E310T1-1 |
用于310、310s及其他需在高温条件下服役的不锈钢的焊接。 Used for welding of 310, 310s and other stainless steel for high temperature service. |
TMS-410NiMo |
TS 410NiMo-FC11 |
E410NiMoT1-1 |
适用于要求较高的水轮机转子、阀门等耐磨耐腐蚀场合.
Suitable for demanding water turbine rotor, valve and other wear and corrosion resistance occasions.
|
TMS-2209 |
TS 2209-FC11 |
E2209T1-1 |
适用于石油化工、海洋工程等领域UNS S31803(即SUS2205)双相不锈钢的焊接。Applicable to the welding of UNS S31803(SUS2205) duplex stainless steel in petrochemical and Marine engineering fields. |
TMS-2594 |
TS 2594-FC11 |
E2594T1-1 |
用于2507型(022Cr25Ni7Mo4N,03Cr25Ni6Mo3Cu2N等)钢的焊接。 Used for welding type 2507 (022Cr25Ni7Mo4N, 03Cr25Ni6Mo3Cu2N, etc.) steel. |